How do you reset a Honeywell door lock?

If you’re referring to a Honeywell electronic door lock, resetting it usually involves restoring it to its default settings or changing the user codes.

Here’s a general guide on how to reset most Honeywell electronic door locks:

1. Remove one battery for 10 seconds.
2. Reinsert the battery and wait for a long and short beep.
3. Press the lock button three times within 3 seconds.
4. The lock will beep and the light indicator will turn green.

But if you are using Honeywell Digital Bluetooth Deadbolt, you will have to reset it like this:

1. Remove the interior assembly, find the reset button is located inside the back panel
2. Press the reset button on the PCB board until you hear one beep. Release, and then three seconds later you will hear a second beep after three seconds.

This indicates that the lock has been reset to the Factory Settings.

For more Honeywell Electronic Door Lock problems and troubleshooting, please check this article: Detailed Honeywell Electronic Door Lock Troubleshooting Guide.