H10 TTlock can not be used to program the RFID key fob

The H10 TTLock is a smart lock system controlled via a mobile application. If you’re having trouble programming an RFID key fob with the H10 TTLock, here are some general troubleshooting steps you can follow:

1. Check Compatibility: Ensure the RFID key fob is compatible with the H10 TTLock. Not all RFID fobs are identical; some may operate on different frequencies or protocols.
2. Consider Replacing the Fob: It’s also possible that the RFID fob itself is defective. If you have another fob, try programming it to see if the issue is with the fob or the Lock.
3. Check Bluetooth connection: If you’re trying to connect or program the H10 TTLock or any other smart lock that uses Bluetooth, it’s essential to ensure your Bluetooth is enabled and connect your Lock with your phone.
4. Ensure the Lock is in Bluetooth Range: Bluetooth typically has a range of about 10 meters (33 feet) without obstructions. Make sure you’re within this range when trying to connect. Walls and other obstructions can reduce this range.
5. Check Battery Levels: Ensure that the Lock’s batteries are not depleted. Low battery levels can sometimes cause erratic behavior.
6. Clear Memory: If the Lock has a maximum number of RFID fobs it can remember, it might be full. You might need to delete old or unused fobs to make space for new ones.
7. Reset the Lock: Sometimes, resetting the Lock to its factory settings can help resolve issues. However, be aware that this will erase all current settings, and you’ll need to reconfigure the Lock.
8. Follow Instructions Carefully: Ensure you follow the correct procedure for programming the RFID fob. This usually involves entering a programming mode on the Lock, presenting the fob, and confirming the addition.
9. Contact Support: If you’ve tried the above steps and still can’t program the RFID key fob, it might be time to contact TTLock’s customer support. They may have insights specific to your model or situation.

Remember, technology can sometimes be demanding, and there might be a simple solution to your problem. If you still have trouble after trying these steps, it might be worth seeking professional assistance or contacting the manufacturer directly.